7 Ofertas de Docente Química en Mexico

Level Description
'Technician' Leveling Guide consists of jobs that accomplish work through a specialized knowledge or skills gained through a combination of vocational education, training, apprenticeship (craft, skilled and semi-skilled), and experience. This career stream will be most commonly applied to manufacturing technician job profiles.
Market Summary
Tests raw, in-process and finished products to ensure quality standards are met. Adheres to safety, health and environmental policies and procedures. Maintains good housekeeping to ensure laboratory cleanliness. Documents results, analyze data, record keeping. Understands preservation of chain of custody. Tracks and reports chemical and supply inventories.
Impact
- Applies developing, but not fully functioning, technical knowledge, as well as equipment, systems, controls, procedures, and/or essential regulations for assigned work.
- Makes routine decisions within limited, defined parameters. Work is guided by well-defined tasks, established deadlines, quality standards, and priorities; learns and implements policies, procedures, quality, and compliance standards.
Communication
- Communication is internal and largely around giving and receiving basic information such as instructions, work processed and directions; little to no interpretation of policies. Straightforward.
- Elevates questions, problems and significant challenges to more senior employees for direction or subject matter expertise.
Innovation
- Recognizes and resolves basic, routine, or common and repetitive problems requiring service and support skills. Seeks assistance on complex issues.
- Performs straightforward work tasks that are patterned and supported by documentation and guidelines requiring minimal independent judgement.
Knowledge
- Demonstrates knowledge of basic to intermediate level concepts, terminology, codes, quality standards, and specialized job requirements.
- Demonstrates basic written, interpersonal, analytical, and application skills; understands FME procedures and applies with minimal instruction.

Job Description
**Químico Analista de Producto Terminado y Estabilidades**
**Acerca de Abbott**
Abbott es líder mundial en cuidado de la salud, que crea ciencia innovadora para mejorar la salud de las personas. Siempre estamos mirando hacia el futuro, anticipando cambios en la ciencia y la tecnología médica.
**Trabajando en Abbott**
En Abbott, puedes hacer un trabajo que importa, crecer y aprender, cuidar de sí mismo y de tu familia, ser verdaderamente quien es y vivir una vida plena. Tendrás acceso a:
+ Desarrollo profesional con una empresa internacional donde podrás hacer crecer la carrera que sueñas.
+ Prestaciones superiores a las de ley
+ Una compañía reconocida como mejor lugar para trabajar en docenas de países alrededor del mundo y nombrada una de las empresas más admiradas del mundo por Fortune.
+ Una compañía que es reconocida como una de las mejores compañías grandes para trabajar, así como un mejor lugar para trabajar para la diversidad, las madres trabajadoras, mujeres ejecutivas y científicas.
**La Oportunidad**
Esta posición está ubicada en Tlalpan en la división de Productos farmacéuticos Establecidos (EPD).
Estamos comprometidos a llevar los beneficios de nuestros medicamentos confiables a más personas en los países de más rápido crecimiento del mundo. Nuestro amplio portafolio de medicamentos genéricos de marca diferenciada y de alta calidad abarca múltiples áreas terapéuticas, incluidas la gastroenterología, la salud de la mujer, los cardio metabólicos, el manejo del dolor / sistema nervioso central y las vías respiratorias.
Como Químico Analista de Producto terminado y estabilidades, tendrás la oportunidad de evaluar las condiciones fisicoquímicas mediante el análisis de muestras de: Producto terminado, muestras especiales, en estudio de estabilidad y proyectos; verificación de métodos analiticos, validación, co-validación, TMT´s de métodos, conforme a buenas prácticas de laboratorio, métodos de análisis, procedimientos y políticas vigentes a fin de obtener datos precisos y confiables que permitan evaluar la calidad de los productos.
**Que harás**
+ Recibir y realizar los análisis de muestras de, producto en proceso, producto terminado local e importado, muestras del programa de estabilidades a largo plazo, estabilidades aceleradas y análisis especiales. Preparación de soluciones empleadas en los análisis, así como ejecutar validaciones, co-validaciones, verificaciones y transferencias de métodos analíticos.
+ Reportar los resultados analíticos obtenidos de los análisis siguiendo los procedimientos establecidos y las normas de GMP´s vigentes.
+ Elaborar y/o emitir, protocolos y reportes de validación, verificación de métodos y transferencias de métodos analíticos (Test Method Transfer).
+ Realizar la auto-capacitación en las actualizaciones respectivas de los procedimientos y manuales de Operación
+ Realizar investigaciones de laboratorio, reportes de investigación de laboratorio (LIR's) y reportes de excepción (RE's)
.
**Cualificaciones requeridas**
+ Licenciatura en Químico Fármaco Biólogo, Químico Farmacéutico Industrial y carreras afines Titulado
+ Experiencia 3 años mínimo recientes, como Químico Analista en Control Físico Químico ,Producto terminado y Estabilidades , HPLC , disoluciones.
+ Inglés técnico, hablado y escrito avanzado.
+ Control de calidad (Análisis de producto terminado y estabilidades)
+ Conocimiento y manejo de Instrumentación analítica, Equipo y software de Laboratorio Analítico (100%)
Buenas habilidades para Trabajo en Equipo
+ Disponibilidad de tiempo, horario martes a sábado (13:30 a 21:30 hrs) y miércoles a Domingo de (13:30 a 21:30 hrs)
+ **PROYECTO TEMPORAL 6 MESES**
**Cualificaciones preferidas**
+ Desarrollo analítico
+ Validación de métodos analíticos
+ Manejo de bibliografía médica y farmacéutica nacional e internacional.
+ Buenas Habilidades analíticas.
An Equal Opportunity Employer
Abbot welcomes and encourages diversity in our workforce.
We provide reasonable accommodation to qualified individuals with disabilities.
To request accommodation, please call or email

Aramco energizes the world economy.

Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.

With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.

Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.

We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.

Overview

We are seeking a Process Engineer with extensive hands-on expertise in Sulfur Recovery Unit (SRU) and Sour Water Stripper (SWS) processes to join our Operation Engineering Solutions Department (OESD).

OESD's technical team is responsible for providing high-quality, multi-disciplinary support to Global Manufacturing operating facilities (Refineries, NGLF, and petrochemical plants) within the Kingdom of Saudi Arabia and globally.

Your primary role is to provide in-depth process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for refineries' SRU & SWS, including remote and on-site technical advisory support, benchmarking, and technology knowledge management.

Key Responsibilities

As the successful candidate you will be required to perform the following:

• Conduct regular performance reviews of existing SRU & SWS facilities and analyze KPIs related to operability, profitability, reliability, and process safety.
• Develop and present quarterly benchmarking reports with actionable improvement recommendations.
• Provide hands-on support in implementing performance improvement initiatives, demonstrating measurable results in closing identified gaps.
• Lead benchmarking and best practices exchange workshops among Global Manufacturing facilities, facilitating knowledge sharing and continuous improvement.
• Develop and distribute bi-monthly SRU & SWS technical best practices bulletins, ensuring knowledge dissemination across Global Manufacturing facilities.
• Deliver on-demand remote and field technical advisory support, including troubleshooting, start-up/shutdown activities, capacity test runs, and technology pilot testing and provide detailed service reports for each support activity.
• Collaborate with Global Manufacturing facilities engineers to identify and implement cost optimization and process improvement initiatives, focusing on "low-hanging fruits" that require minimal capital investment.
• Conduct internal assessments of SRU & SWS process engineering standards, ensuring alignment with Saudi Aramco engineering standards and supporting their implementation across Global Manufacturing facilities.
• Participate in Business Plan development, coordinating with stakeholders on capital investments for SRU & SWS units and supporting techno-economic evaluations.
• Evaluate and recommend new SRU & SWS technologies and coordinate with relevant departments for assessment and piloting support.
• Actively participate in external benchmarking activities with industry bodies such as Japan Cooperation Council Petroleum (JCCP) and Gulf Downstream Association (GDA).

Minimum Requirements

• You will hold a Bachelor's degree in Chemical Engineering or related specialization. An advanced degree is preferred.
• A minimum of 15 years of total refinery or gas plants process units experience, with at least 10 years of hands-on experience in handling SRUs/TGTU/SWS plants.
• You will be able to optimize SRU & SWS operations, with specific examples of performance improvements achieved.
• You will have in-depth knowledge of SRU/TGTU process licensor technologies.
• You will have a proven track record of conducting technical troubleshooting, start-up, shutdown, and capacity test runs for SRU & SWS units.
• You will have strong proficiency in data analysis and visualization tools specific to SRU & SWS performance metrics.
• You will have strong management and coordination skills, with experience in stakeholder management
• You will also have excellent computer and presentation skills.

Work Location and Work Schedule

Work location: Within Saudi Arabia – To be specified in Job offer

Work schedule: Full Time - To be specified in Job offer

Job Posting Duration

Job posting start date: 01/07/2026

Job posting end date: 12/31/2026

Working environment

Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.

At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.

We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy.

Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.

With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.

Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.

We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.

Overview

We are seeking an experienced Corrosion Engineer  to join our Global Manufacturing Excellence (GME) organization under the Downstream Reliability Solutions Department (RSD).

the Reliability Solutions Department (RSD) provides engineering support to Saudi Aramco Global Manufacturing wholly owned and affiliates’ facilities (Refining, NGL Processing, and Petrochemicals). This includes reliability, inspection, corrosion management, static equipment, rotating equipment, electrical equipment, instrumentation and control support.

Your primary role as a Corrosion Engineer is to provide technical support to operating facilities, and the deployment of new technologies related to corrosion management. Developing and prioritizing value-adding programs aimed at enhancing the operational performance of the Saudi Aramco’s downstream assets. You will also conduct technical studies and analyses in specialized corrosion control fields, including cathodic protection, water treatment, chemical inhibition and materials selection.

Key Responsibilities

As the successful candidate you will be required to perform the following:

• Conduct corrosion management assessments & studies, identifying corrosion issues and providing recommendations to mitigate them.
• Develop, and manage the GME Strategic value-driven programs roadmap.
• Deploy technologies related to corrosion management across the Global Manufacturing portfolio.
• Supports corrosion related failure investigations and publish lessons learned from RCAs to avoid reoccurrence.
• Provide consultancy to Global Manufacturing facilities during design, construction, operations and maintenance on matters pertaining to corrosion management.
• Review operations parameters to identify any required modifications to the operating philosophy and procedures to properly manage corrosion issues.
• Conduct corrosion mitigation and integrity review to optimize inspection and corrosion programs and maintain assets overall integrity.
• Review design packages and validate materials selection based on applicable codes and standards.
• Support conduction of risk-based inspection studies (RBIs) based on API-580 methodology.
• Investigate coating related failures and recommended sound, cost effective solutions.

• Support HAZOP review studies from corrosion management point of view.

Minimum Requirements

As a successful candidate you will hold a:

• Bachelor’s degree in Mechanical or Metallurgical Engineering. An advanced degree is preferable.
• 15 years of experience in corrosion management, metallurgical sciences, and welding engineering in the Oil and Gas Industry’s “downstream sector”.
• Able to demonstrate knowledge of the various international standards and codes including NACE, ASME, API and ASTM with emphasis on corrosion and inspection codes such as API-571, API-580, API-570 and API-510.
• NACE Specialist certification, NACE Senior Corrosion Technologist certification or combination of NACE Corrosion Technologist, API-571 and NACE CP level II is preferable.
• Able to demonstrate fluency in English, oral and written.

Work Location and Work Schedule

Work location: Within Saudi Arabia – To be specified in Job offer

Work schedule: Full Time - To be specified in Job offer

Job Post Duration

Job posting start date: 02/11/2026

Job posting end date: 12/31/2026

Working environment

Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.

At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.

We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy.

Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.

With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.

Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.

We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.

Overview

We are seeking a Process Engineer with extensive hands-on expertise in Utilities processes to join our Operation Engineering Solutions Department (OESD) under Global Manufacturing (GM) Excellence Organization.

OESD's technical team is responsible for providing high-quality, multi-disciplinary support to GM operating facilities (Refineries, NGLF, and petrochemical plants) within the Kingdom of Saudi Arabia and globally.

Your primary is to provide in-depth process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Utilities, including both remote and on-site technical advisory support and benchmarking of utilities.

Key Responsibilities

As successful candidate you will be required to perform the following:

• Conduct regular performance reviews of existing Utilities through key performance indicators (KPIs) representing optimum operability, profitability, reliability, and process safety.
• Develop and present quarterly benchmarking reports with actionable improvement recommendations.
•  Provide hands-on support in implementing performance improvement initiatives, demonstrating measurable results in closing identified gaps from quarterly benchmarking reports.
• Lead benchmarking and best practices exchange workshops among Global Manufacturing facilities (wholly-owned and affiliates) and facilitate knowledge sharing and continuous improvement.
• Deliver on-demand remote and field technical advisory support, including process design, troubleshooting, start-up/shutdown activities, and capacity test runs.
• Provide detailed service reports for each support activity, highlighting facility needs, actions taken, results, and lessons learned.
• Collaborate with Global Manufacturing facilities engineers to identify and implement cost optimization or process improvement initiatives, focusing on "low-hanging fruits" that require minimal capital investment, through operational adjustment or design modification.
• Conduct internal assessments on Utilities using Saudi Aramco engineering standard references and highlight any deviations or better standards applied by affiliates for endorsement to facility management or Saudi Aramco Central Engineering.
• Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for Utilities in operating facilities, enabling their execution and effective monitoring.
• Participate in Business Plan development, coordinate with stakeholders for capital investments on assigned Utilities and support techno-economic evaluations.
• Evaluate and recommend new Utilities technologies, coordinate with Central Engineering to facilitate field deployment.

Minimum Requirements

• You will hold a Bachelor's degree in Chemical Engineering or related specialization. An advanced degree is preferred.
• You will have a minimum of 15 years of total Utilities unit experience (process engineering and operations) with at least 10 years of hands-on experience in handling refinery’s utilities.
• You will have experience in water desalination and boilers for steam generation
• You will be able to optimize various utility systems, with specific examples of performance improvements achieved.
• You will have in-depth knowledge of major equipment suppliers and package units for Utilities.
• You will have a proven track record of conducting technical troubleshooting, start-up, shutdown, and capacity test runs for utility systems.
• You will have strong proficiency in data analysis and visualization tools specific to Utilities performance metrics.
• You will also have strong management and coordination skills, with experience in stakeholder management.

Work Location and Work Schedule

Work location: Within Saudi Arabia – To be specified in Job offer

Work schedule: Full Time - To be specified in Job offer

Job Posting Duration

Job posting start date: 01/07/2026

Job posting end date: 12/31/2026

Working environment

Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.

At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.

We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Aramco energizes the world economy.

Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer.

With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society.

Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply.

We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.

Overview

We are seeking an experienced Downstream Process Engineer with extensive hands-on expertise in Fluid Catalytic Cracking (FCC) processes to join the Downstream Operation Engineering Solutions Department (OESD).

OESD's technical team provides high-quality, multi-disciplinary support to Global Manufacturing operating facilities (Refineries, NGLF, and petrochemical plants) within the Kingdom of Saudi Arabia and globally.

Your primary role is to provide in-depth process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for refineries' FCC, including both remote and on-site technical advisory support, benchmarking, and technology knowledge management.

Key Responsibilities

As the successful candidate you will be required to perform the following:

• Conduct comprehensive performance reviews of existing FCC units, analyzing KPIs related to yield, operability, profitability, reliability, and process safety. Develop and present quarterly benchmarking reports with actionable improvement recommendations.
• Provide hands-on technical support in implementing performance improvement initiatives, demonstrating measurable results in closing identified gaps from quarterly benchmarking reports.
• Lead benchmarking and best practices exchange workshops among Global Manufacturing facilities (wholly-owned and affiliates), facilitating knowledge sharing and continuous improvement in FCC technologies.
• Deliver on-demand remote and field technical advisory support, including troubleshooting, optimization, debottlenecking, revamp, and upgrade activities for FCC units. Provide detailed service reports for each support activity.
• Drive performance improvement programs that enhance process safety, optimize manufacturing costs, and increase FCC unit reliability and yield.
• Develop and implement best practices and standards for FCC engineering and maintenance, ensuring alignment with industry standards and regulations.
• Provide expert technical support to project teams and contractors for FCC engineering and procurement activities.
• Coordinate with other disciplines (mechanical, instrumentation, and electrical) to ensure optimal performance and integration of FCC equipment.
• Conduct regular audits and inspections of FCC equipment to ensure compliance with safety, environmental, and quality regulations and standards.
• Evaluate and recommend new technologies and innovations for FCC improvement and optimization, including catalyst developments and advanced control strategies.
• Prepare and update technical documentation and reports for FCC engineering and operation.
• Participate in business plan development and coordinate with stakeholders for capital investments in FCC facilities.
• Facilitate technical knowledge exchange workshops with FCC process technology licensors and Global Manufacturing facilities.
• Develop and deliver in-house technical training programs on FCC operations and optimization to Global Manufacturing facilities as needed.
• Participate in incident investigation activities concerning FCC process technologies as required by operating facilities.

Minimum Requirements

• You must hold a Bachelor's Degree in Chemical Engineering. An advanced degree is preferred.
• You should have a minimum of 15 years of experience in refinery operations, with at least 10 years of hands-on experience specifically in FCC operations and optimization.
• Demonstrated ability to optimize FCC operations, with specific examples of performance improvements achieved (e.g., yield improvements, energy savings, reliability enhancements).
• Comprehensive knowledge of FCC processes, equipment, and systems, including regenerator operations, catalyst management, and product fractionation.
• Deep understanding of FCC catalyst chemistry and selection criteria for various feedstocks.
• Expertise in FCC troubleshooting, including analysis of operational issues such as afterburn, catalyst circulation problems, and product quality deviations.
• Proficiency in process simulation software specific to FCC modeling (e.g., Aspen HYSYS, KBC Petro-SIM).
• Strong knowledge of refinery economics and the impact of FCC performance on overall refinery profitability.
• Familiarity with relevant industry standards and regulations (e.g., API, ASME) applicable to FCC units.
• Excellent oral and written communication skills, with the ability to prepare and present technical reports to various audiences, including senior management.
• Strong problem-solving and decision-making skills, with the ability to work independently and collaboratively with multidisciplinary teams.
• Experience in mentoring junior engineers and operators in FCC operations and optimization techniques.
• As the ideal candidate, you will have a proven track record of optimizing Fluid Catalytic Cracking (FCC) operations in refinery and petrochemical plant settings.

Work Location and Work Schedule

Work location: Within Saudi Arabia – To be specified in Job offer

Work schedule: Full Time - To be specified in Job offer

Job Posting Duration

Job posting start date: 02/12/2026

Job posting end date: 12/31/2026

Working environment

Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.

At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.

We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.