1 Ofertas de Failure Analysis en Hermosillo
Sr Qlty & Reliability Engineer
Hermosillo, Sonora
TE Connectivity
Trabajo visto
Descripción Del Trabajo
TE Connectivity’s Quality and Reliability Engineering Teams analyze the ability of product and production systems to comply with customer and contractual requirements through established reliability factors. They design, recommend revisions and install quality control systems, develop and document analytical methods for establishing reliability of products and their components and conduct analysis on relative reliability with regards to cost, structure, weight, maintainability, facility of production, and availability of materials and equipment. Out teams develop, implement and monitor company environmental safety programs and policies to ensure compliance with federal, state, and local environmental, health and safety regulations and recommend corrective actions if necessary.
**Main Objective**: Establish preventive quality systems that meet the requirements of the Client and the company based on continuous improvement and attached to the quality standards of the company.
**Responsibilities and authority**:
- Active participation in process analysis, new product/process validation, design reviews and Safe Launch activities.
- Coordinate review and submit PPAP documents to customer.
- Prepare PSW and Control Plans and conduct Process Capability and GR&R studies as part of PPAP submissions.
- Active participation with links communication with the client and for approval of PPAP´s.
- Active participation to get and report PPM levels per Client.
- Coordinate client’s demands/complaints
- Responsible of the voice of the Customer feedback
- Responsible of execute APQP & Run-rate events.
- Facilitate action plans for customer specific demands/complaints.
- Follow-up to corrective actions.
- Monitor Customer Portals (as applicable)
- Participates with multidisciplinary Team for scrap disposition and corrective action.
- Has the ability and empowerment to stop out of parameter processes.
- Controls manufacturing process to maximize quality improvement, improved efficiency, and cost reduction.
- Troubleshoots assembly and/or machining equipment as required to meet quality and production requirements.
- Creates and maintains controlled documents such as Control Plan, PFMEA, Operator Work Instruction, In-Process Inspection, Equipment Check Sheet, etc.
- Participates with multidisciplinary Team in APQP, FMEA, DOE, 8D, PSO y FTQ.
- Conducts SPC, CPK, Gage R&R and time study as required.
- Improves equipment layout, process, and material flow to optimize production line efficiency.
- Leads cross-functional team for solving quality problems by using root-cause analysis tools.
- Practices 5S and Plan/Do/Check/Action cycles.
- Trains operators on product knowledge and equipment operation.
- Supports IATF16949 and ISO 14000 audits. Participate in Internal and external audits.
- Follow-up of corrective actions by internal audits.
**What your background should look like**:
- **Education**: Engineering Degree.
- **Professional experience**:+3 years of experience in quality, manufacturing, statistics, control plans.
- Experience as Quality Engineer in IATF 16949 automotive environment.
- Experience using customer portals.
- Experience in an automotive regulated environment (Tier 1 and OEM). Preferred
- **Advance English** (written and spoken)
- Hands on experience with tools of IATF 16949 especially Core tools, Root Cause Analysis.
- Travel within US, Mexico and other international locations as required.
- Knowledge applicable to the position in IATF 16949 and ISO 14001.
- **Valid visa or in process.**
Travel: 10%-25%
Location: Hermosillo.
LI-Onsite
**Competencies**:
- Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
**Main Objective**: Establish preventive quality systems that meet the requirements of the Client and the company based on continuous improvement and attached to the quality standards of the company.
**Responsibilities and authority**:
- Active participation in process analysis, new product/process validation, design reviews and Safe Launch activities.
- Coordinate review and submit PPAP documents to customer.
- Prepare PSW and Control Plans and conduct Process Capability and GR&R studies as part of PPAP submissions.
- Active participation with links communication with the client and for approval of PPAP´s.
- Active participation to get and report PPM levels per Client.
- Coordinate client’s demands/complaints
- Responsible of the voice of the Customer feedback
- Responsible of execute APQP & Run-rate events.
- Facilitate action plans for customer specific demands/complaints.
- Follow-up to corrective actions.
- Monitor Customer Portals (as applicable)
- Participates with multidisciplinary Team for scrap disposition and corrective action.
- Has the ability and empowerment to stop out of parameter processes.
- Controls manufacturing process to maximize quality improvement, improved efficiency, and cost reduction.
- Troubleshoots assembly and/or machining equipment as required to meet quality and production requirements.
- Creates and maintains controlled documents such as Control Plan, PFMEA, Operator Work Instruction, In-Process Inspection, Equipment Check Sheet, etc.
- Participates with multidisciplinary Team in APQP, FMEA, DOE, 8D, PSO y FTQ.
- Conducts SPC, CPK, Gage R&R and time study as required.
- Improves equipment layout, process, and material flow to optimize production line efficiency.
- Leads cross-functional team for solving quality problems by using root-cause analysis tools.
- Practices 5S and Plan/Do/Check/Action cycles.
- Trains operators on product knowledge and equipment operation.
- Supports IATF16949 and ISO 14000 audits. Participate in Internal and external audits.
- Follow-up of corrective actions by internal audits.
**What your background should look like**:
- **Education**: Engineering Degree.
- **Professional experience**:+3 years of experience in quality, manufacturing, statistics, control plans.
- Experience as Quality Engineer in IATF 16949 automotive environment.
- Experience using customer portals.
- Experience in an automotive regulated environment (Tier 1 and OEM). Preferred
- **Advance English** (written and spoken)
- Hands on experience with tools of IATF 16949 especially Core tools, Root Cause Analysis.
- Travel within US, Mexico and other international locations as required.
- Knowledge applicable to the position in IATF 16949 and ISO 14001.
- **Valid visa or in process.**
Travel: 10%-25%
Location: Hermosillo.
LI-Onsite
**Competencies**:
- Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
Lo sentimos, este trabajo no está disponible en su región
Trabajo ya no disponible
Este puesto ya no está publicado en WhatJobs. Es posible que el empleador esté revisando solicitudes, haya cubierto el puesto o haya eliminado la publicación.
Sin embargo, tenemos trabajos similares disponibles para usted a continuación.
Sr Mgr Quality Control
Hermosillo, Sonora
TE Connectivity
Ayer
Trabajo visto
Descripción Del Trabajo
TE Connectivity's Quality Control and Reliability Teams ensure product and / or product components comply with specifications and quality standards. They test and inspect products against performance and integrity criteria to ensure product quality and reliability, and to determine the suitability of product release.
**What your background should look like**:
RESPONSIBILITIES
- Support/lead for customer warranty programs
- Perform customer quality manual reviews. Provides direct input and collects input from cross-functional teams as needed. Documents exceptions in draft responses for final management review and approval. Completes quality-related sections on customer surveys. Foster and proactively build customer relationships in the region through customer visits. Coordinated proactive visits to key customer accounts with sales representatives.
- Maintain compliance of NA Quality Systems (according to ISO & IATF), and support initiatives for common/standard quality procedures across the region.
- Implement quality strategy to support, contribute to, and integrate within the organization’s short and long-term business plan.
- Maintain and improve systems to measure performance against established standards/targets.
- Drive initiatives to improve customer satisfaction while driving down costs (COPQ, Scrap, Customer complaints, etc)
- Regional focal point to manage major customer issues.
- Interface with Product Engineering to ensure AQP tools are properly utilized and “quality at rate” is achieved with all new product development launches.
- Support Lean-Initiatives (TE Operational Advantage) both to optimize/standardize processes as well as to achieve defined targets.
- Continuously work with site leaders to seek and leverage process improvements.
- Ensure Quality best practices and lessons learned are cascaded across all plants and functions.
- Establish effective cross site and cross department communications.
- Provide leadership for all Quality professionals across the region.
- Ensure the highest level of Ethics and Integrity across the assignment.
- Implement the 8 Quality Basics within NA Organization in order to move towards our operational excellence and achieve ECE in our products
- Drive with site leaders and Quality Managers the COPQ reduction (scrap, internal / external sorting, cycle count adjustments, inventory adjustments)
- Define with site Leaders and Quality site Managers the 5 years strategic plan and yearly Quality budget
**REQUIREMENTS**:
- University degree (engineering preferred)
- 8 to 10 years’ experience in Plant Operations various as Quality, Lean Manufacturing, Engineering (product and process engineering), Plant Manager and/or Operational assign-ments
- At least 5 years Regional experience with the leadership of various sites
- At least 10 years of Managerial Experience
- Strong background in Root cause analysis (Green - Black Belt Six Sigma will be a plus)
- Strong background in Customer Management
- Experience and direct contact with OEM´s
- Fluent in English both written and spoken (Spanish will be a plus)
- Excellent interpersonal and communication skills
- Automotive experience and knowledge preferred.
- PPAP, Customer Special Requirements, Problem Solving, Corrective Action, Quality Systems, Lean practices,
- Understanding of molding and assembly operations. Direct operations experience plus.
- 50%-75% travel, NA Region (Mexico and US) ( rest of the time based from home)
REMOTE POSITION
**Competencies**:
- Motivating Others- Building Effective Teams- Managing and Measuring Work- Values: Integrity, Accountability, Inclusion, Innovation, Teamwork- SET : Strategy, Execution, Talent (for managers)
**What your background should look like**:
RESPONSIBILITIES
- Support/lead for customer warranty programs
- Perform customer quality manual reviews. Provides direct input and collects input from cross-functional teams as needed. Documents exceptions in draft responses for final management review and approval. Completes quality-related sections on customer surveys. Foster and proactively build customer relationships in the region through customer visits. Coordinated proactive visits to key customer accounts with sales representatives.
- Maintain compliance of NA Quality Systems (according to ISO & IATF), and support initiatives for common/standard quality procedures across the region.
- Implement quality strategy to support, contribute to, and integrate within the organization’s short and long-term business plan.
- Maintain and improve systems to measure performance against established standards/targets.
- Drive initiatives to improve customer satisfaction while driving down costs (COPQ, Scrap, Customer complaints, etc)
- Regional focal point to manage major customer issues.
- Interface with Product Engineering to ensure AQP tools are properly utilized and “quality at rate” is achieved with all new product development launches.
- Support Lean-Initiatives (TE Operational Advantage) both to optimize/standardize processes as well as to achieve defined targets.
- Continuously work with site leaders to seek and leverage process improvements.
- Ensure Quality best practices and lessons learned are cascaded across all plants and functions.
- Establish effective cross site and cross department communications.
- Provide leadership for all Quality professionals across the region.
- Ensure the highest level of Ethics and Integrity across the assignment.
- Implement the 8 Quality Basics within NA Organization in order to move towards our operational excellence and achieve ECE in our products
- Drive with site leaders and Quality Managers the COPQ reduction (scrap, internal / external sorting, cycle count adjustments, inventory adjustments)
- Define with site Leaders and Quality site Managers the 5 years strategic plan and yearly Quality budget
**REQUIREMENTS**:
- University degree (engineering preferred)
- 8 to 10 years’ experience in Plant Operations various as Quality, Lean Manufacturing, Engineering (product and process engineering), Plant Manager and/or Operational assign-ments
- At least 5 years Regional experience with the leadership of various sites
- At least 10 years of Managerial Experience
- Strong background in Root cause analysis (Green - Black Belt Six Sigma will be a plus)
- Strong background in Customer Management
- Experience and direct contact with OEM´s
- Fluent in English both written and spoken (Spanish will be a plus)
- Excellent interpersonal and communication skills
- Automotive experience and knowledge preferred.
- PPAP, Customer Special Requirements, Problem Solving, Corrective Action, Quality Systems, Lean practices,
- Understanding of molding and assembly operations. Direct operations experience plus.
- 50%-75% travel, NA Region (Mexico and US) ( rest of the time based from home)
REMOTE POSITION
**Competencies**:
- Motivating Others- Building Effective Teams- Managing and Measuring Work- Values: Integrity, Accountability, Inclusion, Innovation, Teamwork- SET : Strategy, Execution, Talent (for managers)
Lo sentimos, este trabajo no está disponible en su región
Sé el primero en saberlo
Acerca de lo último Failure analysis Empleos en Hermosillo !
0