19,932 Empleos en Monterrey

*Job Summary:*

We are seeking a Brazing Quality Engineer to ensure the quality and reliability of our brazing operations in the HVAC industry, focusing on PED certifications, ASME code compliance, and continuous improvement initiatives. The successful candidate will be responsible for auditing and implementing quality processes, reducing defects and customer complaints, and driving Kaizen improvements to support the production of high-quality HVAC products

*Key Responsibilities:*

1. *Brazing Quality Operations:*
- Ensure quality and reliability of brazing operations, meeting PED and ASME code requirements for HVAC products.
- Develop and implement quality control plans, procedures, and standards for brazing processes.
2. *PED Certifications and Modules: *
- Obtain and maintain PED certifications for brazing operations.
- Ensure compliance & responsible for PED modules, including modules D, B, H, H1, and B+D.

- Collaborate with Notified Bodies and regulatory authorities as needed.
3. *ASME Code Knowledge and WPS:*
- Ensure compliance with ASME code requirements for brazing and welding processes.
- Develop and maintain Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).
4. *Auditing and Quality Control:*
- Conduct regular audits of brazing operations to ensure compliance with quality standards and regulations.
- Identify and implement corrective actions to address quality issues and prevent recurrence.
5. *Kaizen Improvements:*
- Drive Kaizen initiatives to reduce defects, leaks, and customer complaints.
- Collaborate with cross-functional teams to identify and implement process improvements. Work together Training Departmnet.

- Provide Guidance & mentoring for Quality Brazing Auditors assuring process it is under control by auditing brazing process & following standards stablishing on brazing process.

6. *Core Tools and Quality Methodologies:*
- Apply core tools, such as FMEA, Control Plans, and Statistical Process Control, to ensure quality and reliability.
- Drive continuous improvement initiatives using Kaizen and lean manufacturing principles.

7. *Handling of surprise PED audits*

8.- Certification together Training Department for Operators Certifications.

*Requirements:*

- Bachelor's degree in Engineering, Materials Science, or related field.
- Minimum 5-7 years of experience in brazing or welding quality engineering.
- Knowledge of PED certifications, ASME code, and WPS for welding processes.
- Experience with quality control, auditing, and continuous improvement initiatives.
- Strong analytical and problem-solving skills.
- Excellent communication and collaboration skills.

*Preferred Skills:*

- Certification in quality engineering (CQE, etc.) or welding engineering (AWS, etc.).
- Experience with brazing and welding processes (Autogenous, TIG, and MIG), including filler metals and flux.
- Familiarity with lean manufacturing and Kaizen principles.
- Strong knowledge of statistical process control and quality methodologies.

*What We Offer:*

- Competitive salary and benefits package.
- Opportunities for professional growth and development.
- Collaborative and dynamic work environment.
 

• Design, develop, and implement ETL processes to extract data from various sources
• Transform data to meet business requirements and load it into data warehouses or databases
• Optimize ETL processes for performance and reliability
• Collaborate with data architects and analysts to define data requirements and ensure data quality
• Monitor ETL jobs and resolve issues as they arise
• Create and maintain documentation of ETL processes and workflows
• Participate in data modeling and database design

• Bachelor’s degree in computer science, Information Technology, or a related field
• 3 to 5 years of experience as an ETL Developer or similar role
• Strong knowledge of ETL tools – ADF, Synapse. Snowflake experience is mandatory. Multi cloud experience is a plus.
• Proficient in SQL for data manipulation and querying
• Experience with data warehousing concepts and methodologies
• Knowledge of scripting languages (e.g., Python, Shell) is a plus
• Excellent problem-solving skills and attention to detail
• Strong communication skills to collaborate with technical and non-technical stakeholders
• Candidates should be flexible / willing to work across this delivery landscape which includes and not limited to Agile Applications Development, Support and Deployment.
• Expert level experience with Azure Data Lake, Azure Data Factory, Synapse, Azure Blob, Azure Storage Explorer, snowflake, Snowpark.

• Competitive salary and a comprehensive benefits package, including health, dental, and retirement plans.
• Opportunities for continuous professional development, training programs, and career advancement within the company.
• A collaborative, innovative, and inclusive work environment that values diversity and encourages creative problem-solving.

What will you do?

• Perform routine inspections of building systems and equipment to ensure proper operation.

• Conduct preventative and corrective maintenance on electrical, HVAC, plumbing, and mechanical systems.

• Diagnose and repair malfunctions in building systems and equipment.

• Respond to emergency maintenance requests promptly and effectively.

• Maintain accurate records of maintenance and repair activities.

• Collaborate with external contractors and vendors as needed.

• Ensure compliance with safety regulations and building codes.

• Assist in the development and implementation of energy-saving initiatives.

• Provide support for building renovations and new construction projects.

• Maintain a clean and organized work environment.

How will you do it?

• Initiate, plan, execute, control, and close projects to deliver project scope within budget and on time.

• Direct cross-functional teams to ensure successful project completion.

• Provide project progress reports, proposals, and status updates.

• Ensure proper execution of Core Tools and compliance with quality standards.

• Implement and maintain effective maintenance practices.

What are we looking for?

• Bachelor’s degree in Electrical, Mechanical Engineering, or related field.

• 3+ years of experience in building maintenance or engineering.

• Strong knowledge of commercial or industrial electrical, HVAC, plumbing, and mechanical systems.

• Ability to read and interpret blueprints, schematics, and technical manuals.

• Excellent problem-solving skills and attention to detail.

• Proficiency in maintenance management software and tools.

• Valid driver's license.

What you would do?

Experienced and highly organized Project Manager to lead and coordinate outsourcing projects from inception to completion. This role will oversee all phases of project execution, ensuring successful collaboration between internal teams and external partners, maintaining quality, timelines, and budget. The ideal candidate has a strong background in managing third-party vendors and offshore teams, with excellent communication and negotiation skills.

Initial 2-year fixed-term contract

How you will do it?

1. Project Planning & Execution

2. Vendor Management

3. Stakeholder Communication

4. Risk and Issue Management

5. Quality Assurance

6. Budget and Cost Control

7. Continuous Improvement

What are we looking for:

• Bachelor’s degree in business, I, Engineering, or a related field (PMP certification is a plus).

• 5+ years of project management experience, preferably with outsourcing or vendor-led projects.

• Spoken and written English. Able to carry on a conversation without difficulty.

• Proven ability to manage international teams and navigate cross-cultural communication.

• Strong organizational, leadership, and problem-solving skills.

• Proficient with project management tools (e.g., MS Project, JIRA, Asana, Trello).

What will you do?

The Master Scheduler will work closely with sales and the plant to ensure Johnson Controls’ production plans are effectively setup to enable the plant to be successful. The Master scheduler will be responsible for developing the production schedule, communicating it out to the organization and managing all plan changes.

· Serves as a primary point of contact for and liaison with sales, logistics, and manufacturing departments.

· Collaborates with these departments to establish schedules and plans that allocate available resources to best serve client or customer needs.

· Periodically compares current and anticipated orders with available inventory of raw materials; uses judgment to anticipate demand for and to acquire additional supplies as needed.

· Integrates sales orders with master schedule; coordinates availability of raw materials, supplies, equipment, and staff as needed to meet delivery dates.

· Maintains master distribution schedule for the assigned facility; revises as needed and alerts appropriate staff of schedule changes or delays.

· Participates in periodic forecasting meetings with sales, marketing, and other related departments; leads additional planning meetings with sales, production, shipping, purchasing, and customer service staff.

· Performs other related duties, as required.

How will you do it?

· Create the assembly line specific build schedules over the near-term horizon (0-12 weeks).

· Align with Sales & Demand planning on the sales & deliverable build requirements that drive the plan.

· Align with the Manufacturing Engineers assigned to each shop to understand shop constraints and incorporate these into the scheduling algorithm.

· Support the Supply Chain Planning to include supply constraints (capacity / mix limitations, logistics issues) and, similarly, incorporate these into the scheduling algorithm.

· Build the plan using Theory of Constraints & Optimization techniques to ensure that the following objectives are achieved: build mix is achieved each week, plan is structured so shops can run as efficiently as possible and critical supply chain constraints are accounted for (supplier capability issues & logistics costs, i.e. expediting) so that the lowest cost build plan is achieved.

· Lead the cross-functional change management process when issues occur inside the frozen window (1 week).

· Build the model and run the analysis to identify the most effective solution for the plant (minimizes costs / maximizes revenue opportunity) given the issue (such as): urgent sales change requests (demand re-balancing, delivery schedule changes); Production (equipment breakdown) or supply chain (material shortage) issues.

· Coordinate the introduction of NPI into the production system.

· Attend program launch meetings to understand impacts of new variants to the production and ensure that the launch timing solves given other factory priorities.

· Participate in the daily plant operational review to understand and maintain the health of material flow through the plant.

· Own reporting on plant status & performance (weekly, monthly & quarterly) out to production management & key partners / stakeholders in the organization.

· Pull data from the ERP & the production management systems to understand status.

· Use data visualization tools such as Tableau and PowerBI to generate the status reports.

· Support operational report out to the weekly Sales & Operational Execution (S&OE) meeting.

· Define the business requirements & generate the use cases to drive software development.

What are we looking for?

Required:

· A bachelor's degree or higher in Industrial Engineer, business administration, computer science, or a certification in operator or vendor management, such as the APICS Certified in Production and Inventory Management (CPIM) or the APICS Certified Supply Chain Professional (CSCP) required.

· 3-5 years related experience in materials management, production planning, or material scheduling in a manufacturing company is required.

· Strong analytical capabilities - including data analysis to optimize plans relative to different constraint factors (equipment capacity, staffing plans, material availability) is required.

· Travel: 5% - 10%

Preferred:

· Proficiency in SAP.

· Proficiency in analytical and reporting tools (MS Excel, Tableau) is strongly desired.

· Has demonstrated high level performance in current and previous positions.

· Has shown initiative, the desire to drive change and is motivated to exceed expectations.

· Possesses statistical knowledge and the ability to apply statistics to product and process improvement projects.

· Has a solid grasp of manufacturing principles, including Process, Information, and Material flow.

· A strong interest in process and quality improvement and the ability to provide leadership.

· Ability to communicate effectively in verbal, written, and presentation skills.

· Has demonstrated effective interpersonal skills and the ability to exercise influence without authority.

What will you do?

• Performs product mechanical design of HVAC units. Interact with mechanical product engineering team to develop sub-assemblies for manufacturing.

• Performance detailed drawing creation and revision under product manufacturing direction in accordance with MBOM.

How will you do it?

• Design of electrical harness schematics, piping and instrumentation diagram

• Design of mechanical 3D models, piping, sheet metal, assemblies.

• 2D Engineering drawings interpretation and creation.

• Develop and improve design guidelines and processes.

• Verify design with simulation tools.

• Analize carefully the MBOM information to create or revised drawings.

What are we looking for?

• Industrial Design, Automotive Design, Mechanical, Mechatronics. Aeronautical, Electronic/Electrical Engineers.

• Creo Parametric or similar experience.

• PLM Windchill experience.

• SAP experience.

• Electrical design knowledge.

• Mechanical design knowledge.

We are seeking a Brazing Quality Engineer to ensure the quality and reliability of our brazing operations in the HVAC industry, focusing on PED certifications, ASME code compliance, and continuous improvement initiatives. The successful candidate will be responsible for auditing and implementing quality processes, reducing defects and customer complaints, and driving Kaizen improvements to support the production of high-quality HVAC products.

Key Responsibilities:

1. Brazing Quality Operations:

• Ensure quality and reliability of brazing operations, meeting PED and ASME code requirements for HVAC products.
• Develop and implement quality control plans, procedures, and standards for brazing processes.

2. PED Certifications and Modules:

• Obtain and maintain PED certifications for brazing operations.
• Ensure compliance & responsible for PED modules, including modules D, B, H, H1, and B+D.
• Collaborate with Notified Bodies and regulatory authorities as needed.

3. ASME Code Knowledge and WPS:

• Ensure compliance with ASME code requirements for brazing and welding processes.
• Develop and maintain Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

4. Auditing and Quality Control :

• Conduct regular audits of brazing operations to ensure compliance with quality standards and regulations.
• Identify and implement corrective actions to address quality issues and prevent recurrence.

5. Kaizen Improvements:

• Drive Kaizen initiatives to reduce defects, leaks, and customer complaints.
• Collaborate with cross-functional teams to identify and implement process improvements. Work together Training Department.
• Provide Guidance & mentoring for Quality Brazing Auditors assuring process it is under control by auditing brazing process & following standards stablishing on brazing process.

6. Core Tools and Quality Methodologies:

• Apply core tools, such as FMEA, Control Plans, and Statistical Process Control, to ensure quality and reliability.
• Drive continuous improvement initiatives using Kaizen and lean manufacturing principles.

7. Handling of surprise PED audits

• Certification together Training Department for Operators Certifications.

Requirements:

• Bachelor's degree in Engineering, Materials Science, or related field.
• Minimum 5-7 years of experience in brazing or welding quality engineering.
• Knowledge of PED certifications, ASME code, and WPS for welding processes.
• Experience with quality control, auditing, and continuous improvement initiatives.
• Strong analytical and problem-solving skills.
• Excellent communication and collaboration skills. *

Preferred Skills:

• Certification in quality engineering (CQE, etc.) or welding engineering (AWS, etc.).
• Experience with brazing and welding processes (Autogenous, TIG, and MIG), including filler metals and flux.
• Familiarity with lean manufacturing and Kaizen principles.
• Strong knowledge of statistical process control and quality methodologies.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and dynamic work environment.
• Recognition and rewards for outstanding performance and contributions to quality excellence.

If you are a quality professional with experience in brazing and welding operations, and a passion for continuous improvement, please submit your application.

What will you do?

• Performs product mechanical design of HVAC units. Interact with mechanical product engineering team to develop sub-assemblies for manufacturing.

• Performance detailed drawing creation and revision under product manufacturing direction in accordance with MBOM.

How will you do it?

• Design of electrical harness schematics, piping and instrumentation diagram

• Design of mechanical 3D models, piping, sheet metal, assemblies.

• 2D Engineering drawings interpretation and creation.

• Develop and improve design guidelines and processes.

• Verify design with simulation tools.

• Analize carefully the MBOM information to create or revised drawings.

What are we looking for?

• Industrial Design, Automotive Design, Mechanical, Mechatronics. Aeronautical, Electronic/Electrical Engineers.

• Creo Parametric or similar experience.

• PLM Windchill experience.

• SAP experience.

• Electrical design knowledge.

• Mechanical design knowledge

Serás responsable de la gestión de los procesos de entrenamiento y capacitación en la compañía, así como de asegurar que el personal hourly y salary cuente con las competencias demostrables de acuerdo al puesto. Encargado de coordinar y gestionar los entrenamientos anuales derivados de la DNC a través del personal del departamento para cumplir con los objetivos establecidos.

Responsabilidades

• Apoyar las necesidades actuales y futuras de capacitación de los empleados, evaluar y mejorar los materiales de capacitación y coordinar sesiones de capacitación con los empleados en el sitio.
• Colaborar con ingenieros y gerentes para identificar necesidades de capacitación, trazar planes de desarrollo para equipos e individuos.
• Responsable de dirigir, elaborar, desarrollar, coordinar, conducir y mantener registros para todos los programas de capacitación. I
• mplementar y coordinar la capacitación para todos los departamentos dentro planta
• Llevar a cabo / apoyar la capacitación de orientación para nuevos empleados.
• Gestionar los documentos y procesos de acuerdo con el sistema operativo Johnson Controls Management System, ISO 9001, 14001 y 45001 vigentes en JCI.
• Cumplir con los indicadores, programas, capacitaciones, reglamentos y procedimientos de Seguridad, Salud y Medio Ambiente.

Requisitos:

- Licenciatura o Ingenieria en Manufactura, Mecánico Administrador, Industrial

- +2 años de experiencia en un rol similar; Equipos de alto desempeño, seguimiento a plan de capacitación, mejoras en procesos, etc.

-Conocimientos en capacitación hourly / salary, STPS en lo referente a capacitación Máquinas y herramientas.

- Manejo de algún sistema de nómina o administración de personal

-Ingles Avanzado

- Disponibilidad de horario

- Paquetería Office (Avanzado)

- Manejo de Kronos y/o Sistema Tress